ASHSPEC PRODUCTS & SERVICES

About AshSPEC:
AshSPEC provides high-performance Z32 products that have been designed, tested, and refined all in-house. None of these products are mass-produced or contracted for manufacture overseas. Each order is hand-built in order to meet the most stringent quality standards. Our motto is "If it isn't good enough to put on our own Z's, it isn't good enough to be packaged and shipped to our customers.

AshSPEC LLC consists of two full-time workers, Maxwell Manigold and Ash Powers. Part-time assistance is provided by Angela Powers. AshSPEC has been providing products to the Z32 community since 2000.

AshSPEC has focused on the R&D of several key components within the Z32 in order to provide the best of the best in these products for our customers. The capabilities of AshSPEC range from simple custom part fabrication, dyno tested and refined hardparts, all the way to highly specialized engine computer programming and engine management system design.

We have all of the typical metalworking equipment in-house but extend our capabilities for precision work through use of our metal lathe and vertical mill. Additionally, we have all of the equipment necessary for producing our own casting patterns and casting parts in aluminum. We also have an in-house annealing oven for aluminum tubing and will have our own mandrel pipe bending equipment by the end of 2008.

We offer products of which we obtain professional, certified welding services for their manufacture. Even despite this "outsourcing" of services, we are still present during the assembly process in order to ensure the highest quality standards.

While the goal is to provide the timeliest correspondence and processing of your order, the volume of email and product manufacturing may delay email replies and delivery dates. Some materials for the manufacture of products are not stocked in quantities and are purchased on a per-order basis from various suppliers which may present delays in processing your order. Some products require precision machine work and/or welding processes that are scheduled with various providers and are subject to availability. Everything we manufacture arrives to us as a raw-materials format and from that we construct the products you find available through the website. Our website states typical ETAs for all of our products. Please be assurred that we are always doing our best to keep up with incoming orders but due to the nature of the custom fabrication involved in all of our products there may be unexpected delays associated with the delivery of your order. Please be patient in the event of delay and understand that we are working diligently 6+ days a week to make this happen.

2.5" Intake Piping Kits:
This upgrade piping kit improves air delivery from the turbochargers to the intercoolers and up to the intake manifold. Coupled with our MASSIVE SMIC setup, this kit boasts performance gains as much as 40RWHP with improvements in spoolup and torque production throughout the entire RPM band.

MASSIVE and Sport Sidemount Intercoolers:
These upgraded sidemount intercoolers offer the best of pricing and performance available on the market. Using cast aluminum endtanks fitted with mandrel bent 6061 alumiunum tubing, these intercoolers provide the best in airflow capacity and using bar-plate cores to offer the best in efficiency.

BRAKES
This upgrade kit consists of the Ford Cobra rotors which have superior venting technology and a whopping 13 inches of diameter compared to stock 11! Kit includes caliper relocating brackets, hubcentric alignment rings, and associated fasteners. *Coming Soon!*

DOOLZ
Dual-Intake design using shared plenum. This setup evenly splits the intake air volume to maintain equal flow of air through both filters. Not only does this eliminate the need for low load drivability hoses to be installed, but it produces consistent A/F results from one car to the next. Because the amount of metered air is split in half between both sides, the maximum airflow quantity which can be correctly metered is doubled. *Coming Soon!*

ECU UPGRADES
Upgrades are available for both NA and TT Models, 5speed or automatic, and vehicles will even pass the most stringent CA emissions tests - gauranteed!

HARDPIPES
Truly one of the best cosmetic engine bay enhancements in combination with a polished intake plenum! This kit consists of four polished mandrel bent pipes, couplers, and high quality stainless steel T-Bolt hoseclamps. Pipes are available in mild steel or for a small premium they can be provided in stainless steel. *Coming Soon!*

CUSTOM TUNING
Ash can come to your location and tune your car at a local facility. Please contact Ash directly for availability and prices.

ZEMULATOR
The ultimate 300ZX tuning tool. This device allows the user to tune every aspect of engine control using a laptop computer. It has already proven itself as the 'unfair advantage' over the competition as vehicles tuned with this system have enjoyed horsepower and torque figures not seen before with the hardware those vehicles had installed. This product is available at a price no other engine management system can be compared.